Unfortunately, there is not yet such a technique that could bear various external influences on it without consequences, and the technical equipment of the Iphone manufacturer is not an exception. A very common problem for users is glass damage. Moreover, it is worth noting that glass replacement is a rather difficult task that not every radio technician can handle. In this article, we offer an overview of step-by-step instructions for gluing glass on the Iphone 5s. This procedure is a rather specific type of repair, which is explained by the continuity of the parts of the display module. The peculiarity is such that if the glass is damaged, the entire module must be replaced. Why it is impossible to replace only the top glass, or to paste on top new? The point is that there is a specialized glue between the glass and the sensor, and if you also stick a new glass on top, a layer of dust forms above the display, which in the course of time will still lead to the need to change the entire module
. When analyzing the Iphone 5s, it is necessary to adhere to the following chronology: 1) case 2) battery 3) screen mount 4) front camera 5) Home button 6) screen. Below we present to your attention a more detailed scheme of work.
Related blog : Cracked IPhone Screen – What Do I Do Following?
Replacing the module Iphone 5s. Walkthrough.
1. First of all, you need to turn off the mobile device.
2. Next, you need to unscrew the 2 screws that are in the bottom of the case.
3. With the help of a scalpel, carefully lift the screen (1-2 cm) from the bottom of the Iphone 5s so as not to harm the loop of the Home button, then turn off this button.
4. The next stage is to raise the cable by 90 degrees (if possible, it is best to do it with the help of a sucker) and unscrew the 4 screws that hold the cables, which are then disabled.
5. After disconnecting the cables, unscrew another 3 screws securing the Home button (detach this part very carefully so as not to damage or tear the connected cable) and rearrange this button to a new glass.
6. Next is the case for the camera cable and speaker. Disconnect them and re-glue to the new module.
7. Rearrange the metal frame, which is attached with 6 screws.
8. The final stage is to assemble all the components in the reverse order. Be especially careful when working with the Home button and the camera. Their installation may require several attempts. After that, we check the performance of the speaker, camera and the Iphone 5s in general. In the case of an unsuccessful attempt to plywood glass, be sure to contact the service center in order to avoid subsequent damage to your device.
Useful information : Why Your IPhone May Not Be Charging.
Important! Unscrew the screws carefully and tighten them backwards! The main thing is not to confuse them and not to rearrange in some places. The consequence of such actions may be damage to the motherboard. Also when installing a new screen, it is better to start from the top down. This may require several large forces, because the installation often goes tight, but this is a standard situation. The main thing is not to overdo it.
It is not a secret, but even the seemingly most durable and reliable equipment sometimes needs technical support and repair. This instruction will be able to help you in repairing the Iphone 5s, namely glass plywood. You can independently do plywood, but it is worth considering that there will be no guarantee that the Iphone will work smoothly.
İnteresting Blog : What To Do If You Drop Your IPhone In Water?
Nevertheless, it is recommended to contact the service center, where specialists will be able to return one hundred percent performance to your smartphone after repair, while providing a guarantee that it is a very important aspect in the operation of a smartphone after service.
For useful information and repair services : https://rocketfix.com/